CYC X1 Stealth Gen 3 Mid Drive eBike Conversion Kit With 52V 20AH Battery

The X1 Stealth Gen 3 is a high-powered mid-drive electric bike conversion kit made for powerful power, all-terrain use. Rated at 1500W & 150N.m.

Pedal Assist And/Or Throttle Assist - Or Use Both Simultaneously

The stealth has a 104BCD which will fit any standard 104BCD belt pulley or chainring including carbon belt drives with 104BCD

Click Here For CYC Ride APP Details and Download

Read more details on the X1 Stealth Gen 3 product page >

*Failure to set power settings correctly through the CYC Ride App may cause damage to your battery and/or motor. Warranties will not be honored in this case.

The DS103 display with CYC specific firmware is integrated with the controller and the CYC Ride Control mobile app. It's easy-to-read formfactor gives you all the stats you'll need on the go. Plug-n-play ready.

INCLUDES:

• DS103 display - Suitable for Photon, Stealth, X1 Pro

SPECIFICATIONS:

• Nominal Voltage = 36-72V
• Waterproof = IP65
• Controller Compatibility = X6P, X6, & X12
• Operating temperature = -20°C to 60°C
• Screen specification = 3.5” colored TFT (480*320pixels)

The ISIS crank arm set is a 5 degrees off-set & made to be paired with the Gen 3 & Photon kits. Ride with confidence knowing that your cranks won't give in even in extreme terrains.

Includes: Left & Right side crank arm

SPECIFICATIONS:

• Material = 7075-t6 aluminium
• Compatibility = X1 Pro Gen 3, X1 Stealth Gen 3, & Photon

Replacement Bafang Main Wiring Harness compatible with the BBS01/BBS02/BBSHD. This is the main cable that connects the motor assembly to the main handlebar components like brakes, throttle, display. This lead is fitted with waterproof connection plugs

Electric bicycle thumb throttle  with Bafang BBS01B, BBS02B and BBSHD kits

The CYC speed sensors reads your speed via pulses detected from the speed sensor magnet as it moves with your wheel. There are two kinds of sensors available which depends on your controller type.

CONTROLLER COMPATIBILITY:

• X-Series controllers

SPECIFICATION:

• CYC X6 / X12 = 7-pin male

INCLUDES:

• 2x magnetic brake sensors
• 2x magnets

Installation guide provided upon request (eCopy).

Not compatible with X1 Pro Gen 1.

A necessary complete tool kit for CYC Motor eBike conversions

INCLUDES:

• Allen Keys 1.5mm 2mm 2.5mm 3mm 4mm 5mm 6mm 8mm
• Crank remover tool
• Bottom bracket remover tool
• Lock Ring / BB Cup 16 Notch Tool
• Chain breaker tool
• Pedal removal tool
• Cable ties to neaten up the wiring looms

Built to Cap Rouge specifications, this battery is suitable for bikes with motors up to and including 2500W

High quality, long life battery built using 21700 cells

This battery is one of Cap Rouge specialties. We are the first Australian reputable company to use top line 21700 cells. This battery is for long life and high performance.

All cells used in our batteries are 100% new and tested to International Electrotechnical Commission (IEC) standard 62133-2-2017 or 2012, beware as many Australian suppliers do not mention the brand of cell used

XT90 Spark proof connector instructions here

SPECIFICATION:

• 52 Volts
• 20 Ah
• 1040 Wh
• 14S4P
• Samsung 50G 21700 cells, tested to EN62133-2-22017
• Dimensions: L 367mm - W 95mm - H 125mm
• 1-5A, 2A, 3A or 4A battery charger options
• ST3 3 pin charger port
• 5A maximum charge input
• 5.05 Kg Including bracket / excluding charger
• Discharge cable with XT90 female connector
• 50A Continuous discharge, for motors up to 2500W
• Battery base bracket included
• Battery power indicator
• 2 Keys included
• Battery Management System (BMS)

PROTECTION FUNCTION:

1. Charging voltage
2. Balance voltage for single cell
3. Current consumption
4. Maximal continuous charging current
5. Maximal continuous Discharging current
6. Over charge Protection
7. Over discharge protection
8. Over current protection
9. Short protection
10. Resistance Protection

PROTECTION FUNCTION:

1. Overload
2. Over voltage
3. Over temperature
4. Over current

SPECIFICATION:

• Suitable for 52 volt lithium batteries
• AU Plug
• ST3 Connector
• 58.8V Maximum charging output (suitable for 52 volt lithium batteries only)
• Black case
• Charge light indicating state of charge
• 4A Fast charger
• Smart charger
• Instruction booklet

FEATURES:

• To space out mid drive motor away from chain stay
• Compatible with BBS01 BBS02 and BBSHD motors, Tongsheng and CYC
• Price is for three (3) spacers 1.5mm