Installing the Bafang BBS01B mid-drive motor on your bike is a great way to give your ride an upgrade and improve its performance. With the right tools and instructions, it's a project that can be tackled by most DIY enthusiasts. In this article, we'll provide you with a comprehensive guide on how to install the Bafang BBS01B mid-drive motor on your bicycle.
Tools You'll Need:
Before you get started, make sure you have all the necessary tools. Here's what you'll need:
- Bafang BBS01B mid-drive motor kit
- Appropriate wrenches (usually 8mm, 10mm, and 14mm)
- Bottom bracket tool (for removing the bottom bracket)
- Bafang Tool - Provided in kit
- Allen keys (usually 4mm, 5mm, and 6mm)
- Crank puller tool
- Torque wrench
- Electrical tape or heat shrink for any connections that need it.
How to install the Bafang BBS01B mid-drive motor
Here is our step by step guide to installing a Bafang BBS01B mid-drive motor kit:
Step 1: Remove the Pedals and Bottom Bracket
Start by removing the pedals and bottom bracket from your bike using the appropriate wrenches and bottom bracket tool. This will give you access to the bottom bracket shell, where the Bafang motor will be installed.
Step 2: Install the Bafang Motor
Follow the manufacturer's instructions to install the Bafang motor onto the bottom bracket of your bike. Use the appropriate torque when tightening the bolts, and be sure to position the ebike motor properly. If necessary, use spacers to ensure that the motor doesn't touch the chainstay.
Step 3: Install the Chainring
The Bafang kit usually comes with a chainring already slapped on it. But if it's not there, no worries, just grab the right bolts and attach it to the motor. Make sure it's all tightened up properly and aligned with the chain.
Step 4: Install the Cranks
Next up, it's time to attach those Bafang cranks, left and right, to the motor crank using the right bolts.
Step 5: Install the Wiring
Now, let's run the wiring from the Bafang motor to the controller and battery. Make sure to read the manufacturer's instructions carefully and follow them closely. Once you've got the wiring in place, use some electrical tape to secure it and prevent any loose wires flapping around.
Step 6: Install the Battery
Time to attach the battery to your bike's frame, dude! Follow the instructions that came with the battery and make sure to mount it in a safe and secure spot on the bike. Safety first, you know?
Step 7: Test the Motor
Alright, it's time to fire up that motor and see if it's running like a champ. Test out the torque sensor and the throttle (if you've got one) to make sure everything's working properly. If there are any issues, don't sweat it. Just check the manufacturer's instructions and troubleshoot the problem step by step.
Step 8: Adjust the Brakes and Gears
Keep in mind that the Bafang motor could mess with the brakes and gears on your bike. So, it's important to adjust them accordingly to make sure they're working properly. Give 'em a quick check and tweak 'em as needed.
After following these instructions, your bike should now have the Bafang BBS01B mid-drive motor installed successfully. Have a pleasant ride! However, remember to prioritise safety measures when handling electrical components. It is important to carefully read and follow the manufacturer's instructions and take sufficient time to ensure that the installation is done correctly. With the appropriate tools and a little patience, you can give your bike the necessary upgrade.
You can also check our wide range of ebike mid drive conversion kits!