Tongsheng 48V 500W TSDZ2-B Mid Drive Motor Electric Bike Conversion Kit
TongSheng TSDZ2-B 48V 500W with Torque Sensor Mid Drive Conversion Kit With eBike Battery Options
Fits 68-73MM Bracket - BSA Threaded, JSA Standard
860C Display
Torque Sensing Motor
Pedal Assist And/Or Throttle Assist - Or Use Both Simultaneously
Thumb Throttle & Brake Sensors Included
500W Motors Are Now Street Legal in NSW
Make Your Selection of eBike Battery and eBike Smart Charger From The Drop Down Menus Below
Need Help? Call us 1300 809 840
For More Information On The Battery You Choose, Click Here For 48 Volt Batteries
Alternatively, Scroll To The Bottom Of The Page And Click On Each Of The Individual Battery Models To See Which Battery Works Best For Your eBike Conversion
2A, 3A or 4A Battery Charger Options
Why choose the little motor- TSDZ2 B Mid drive motor?
****** Updated B Model ******
- Fits 95% of standard bike frames with 68-73mm bottom bracket built in torque and cadence sensor- this results in much smoother acceleration than any cadence sensor mid drive motor.
- Easy to install. Kit includes all installation parts and tools.
- The motor has an extra support mount - resulting in a much more reliable install.
- 90Nm of torque
- Light weight and powerful: 30% lighter than a Bafang motor for almost the same power output
The TSDZ2 Mid Drive Motor - Torque Sensing Pedal Assist: The harder you pedal - the harder the motor works with you. 4 levels of assist provide smoothly integrated power ranging from +36-300%, allowing you to conquer virtually any hill with ease. These kits retrofit most bicycles by replacing the bottom bracket & crankset assembly - to utilise the existing drivetrain & gears for maximum efficiency.
860C Display - The 860C is a larger, centre colour mounted display with handlebar mounted button panel.
48V 500W Version
- Assisted Speeds up to 45 kmh (motor does not provide assist past programmed limit on model, 45kmh being the maximum value - while you can set the motor speed limit higher on the 36v models, we recommend the more powerful 48v for speeds up to 45 kmh) Please note: 25 km/h is the legal limit within Australia (except NSW, TAS 500W) for on-road use
- Power Assist Ratio: 36%~300% (with 4 levels of torque sensitivity-to-power-output to choose from)
- Maximum Torque 90 N.m
- Pedal Cadence Assist: 90/100/110/120 RPM
- Throttle Included
- Brake Sensors Included
- Speed Sensor w/ Spoke Magnet (speed sensor attaches to the chain stay, and the magnet attaches to a wheel spoke)
- Mid Drive Utilises the Drive Train Gearing (for increased efficiency & optimal hill climbing ability)
- Chain Ring Size 34T, 42T, 52T
- Integrated 8 pin Controller (for better protection and less wiring clutter)
- Easy Installation (The TSDZ2 Mid Drive Kits fit 95% of bikes with threaded JIS/BSA bottom brackets)
- Installation Tool
- XT60 Male connector from motor
- Small & Lightweight: 3.6 kg
What's in the box
-
1 x 48V 500W Mid Drive Motor TSDZ2-B New Model XT60 Male connector
-
1 x 860C Display Panel With Control Pad
-
1 x Set of Cranks
-
1 x Speed Sensor
-
1 x Wrench
-
1 x Throttle, 1T4 Harness, Brake Sensors
-
1 x Manual
Specifications:
Model |
TSDZ2-B mid-drive high speed geared motor |
Position |
Mid Motor |
Construction |
Gear Motor |
Rated Voltage |
48V |
Power |
500W |
Max Torque |
90N.m |
Controller |
Integrated into the motor |
Sensor |
Torque sensor is integrated into the motor |
Power Assist Ratio |
36%-300% |
Bottom Bracket |
68mm-73mm |
Chain Wheel |
34T, 42T, 52T |
limited current |
16A |
Max Speed |
45km/h |
Motor weight |
3.6kg |
IP-Code |
IP54 |
CLICK BELOW FOR EACH BATTERY OPTION MODEL
48V 15Ah / 720Wh Downtube Samsung eBike Battery CPPOLF48-15
48V 15Ah / 720Wh Rear Rack Samsung eBike Battery And Rear Rack CPSR48-15-WR
48V 20Ah / 960Wh Rectangle Samsung eBike Battery CPSQ48-20
48V 20Ah / 960Wh Downtube Samsung eBike Battery CPPOLF48-20
48V 20Ah / 960Wh Downtube Samsung eBike Battery CPHLAF48-20
*Images for visual purposes only