Bafang 43V 14Ah/602 Wh BT C01.600.UC Rear Rack eBike Battery
Bafang 43 Volt eBike Battery
43Volt
14AH / 602 Wh
The Bafang Factory Supplied 43V bicycle battery is suitable for use in the UART system and the Canbus system. Note: this is a completely new battery, we do not repair or rebuild any lithium batteries
This bicycle battery can replace the bicycle batteries with, among others, the following type numbers:
All Bafang batteries. Both the UART system and the UART / CanBus system
Model numbers: BT C01.340.UART, BT C01.450. UART, BT C01.600.UART, BT C01.750.UART,
BT C01.340.UC, BT C01.450.UC, BT C01.600.UC, BT C01.750.UC
Specifications
- Weight 3.6 kg
- Dimensions 40.8 × 12.3 × 7 cm
- Voltage 43 V
- Capacity 14 Ah
- Watt Hours 602 Wh
- Colour Black
- Battery Type Lithium-ion
- Charger This battery works with your original Bafang charger
- Battery location This is a rear rack battery, to suit Bafang 43 volt systems
Dimension A | 408 mm |
Dimension B | 70 mm |
Dimension C | 123 mm |
SPECIFICATIONS IN DETAIL
Core Data
Rated Voltage(DCV) | 43 |
Nominal Capacity(Ah) | 14 |
Base Parameter
Energy Content(Wh) | 600 |
Com Protocol | UART & CAN |
Cell | SDI-3.5 Ah |
BMS | Smart BMS |
Voltage Scope(V) | 32.4-49.2 |
Internal Resistance(mΩ) | < 140 |
Charge mode | CC-CV (Special 5P Charger) |
Continous Charge Current(A) | 2A & 3A |
Charging time | 8.5h with 2A Charger / 5.5h with 3A Charger |
Max Continous Discharge Current(A) | 24 |
Consumption Rate - Work | ≤10mA |
Consumption Rate - Sleep | ≤400uA |
Consumption Rate - Deep Sleep | 50uA |
Operation Temperature-Charge | 0°-45° |
Operation Temperature-Discharge | -20°-60° |
Storage(At 35% SOC & -10 ~ 35℃) | 6 Month |
Matching Parameter
Position | Carrier |
Dimension(mm) | 408*123*70 |
Weight(kg) | 3.5 |
Mounting type | Racktype |
Charger | Special 5P charger |
Tests & Certifications
IP-Code | IP X6 |
Certifications | CE / UN38.3 / MSDS / 13849 / 15194 / 62133 / PSE |
Note, this battery discharge is from the opposite end to the handle, or where the four pins outlet are located.
All cells used in our batteries are 100% new and tested to International Electrotechnical Commission (IEC) standard 62133-2-2017 or 2012, beware as many Australian suppliers do not mention the brand of cell used