Skip to content
AUSTRALIA'S BIGGEST RANGE OF CERTIFIED EBIKE BATTERIES AND CHARGERS AT THE LOWEST PRICES ! FREE POSTAGE OVER $50*
AUSTRALIA'S BIGGEST RANGE OF CERTIFIED EBIKE BATTERIES AND CHARGERS AT THE LOWEST PRICES ! FREE POSTAGE OVER $50*

TongSheng 48V 500W TSDZ2 with XH-18 Display, Torque Sensor Mid Drive Conversion Kit and 13Ah Battery

Sold out
$1,136.00
SKU TSDZ248V500W13AHXH-18

TongSheng TSDZ2 48V 500W with XH-18 Twist Function Display, Torque Sensor Mid Drive Conversion Kit and 13Ah Battery

Fits 68-73MM Bracket

Torque Sensing Motor

XH-18 Display

48V 13Ah / 624Wh 25A Polly DP-6 DLG 3200Mah 18650 Cells Lithium Battery with 2A Charger

Why choose the little motor- TSDZ2 Mid drive motor?

  • Fits 95% of standard bike frames with 68-73mm bottom bracket built in torque and cadence sensor- this results in much smoother acceleration than any cadence sensor mid drive motor.

  • Easy to install. Kit includes all installation parts and tools.

  • The motor has an extra support mount - resulting in a much more reliable install.

  • 90Nm of torque 

The TSDZ2 Mid Drive Motor - Torque Sensing Pedal Assist: The harder you pedal - the harder the motor works with you. 4 levels of assist provide smoothly integrated power ranging from +36-300%, allowing you to conquer virtually any hill with ease. These kits retrofit most bicycles by replacing the bottom bracket & crankset assembly - to utilise the existing drivetrain & gears for maximum efficiency

The XH-18 Display - The compact left handlebar mount XH-18 features a spring loaded half twist to function as the +\- buttons to adjust the level of assist, as well as cycle menu options. This is a very smooth way to adjust your assist level on the fly. The power button doubles as on/off for the lights with a short press, and the information button toggles the trip/odometer readout. You can also adjust the settings for wheel diameter, change the speed limit, switch between miles or kph, and more.   

48V 500W Version

 FEATURES:
  • Assisted Speeds up to 45 kmh  (motor does not provide assist past programmed limit on model, 45kmh being the maximum value - while you can set the motor speed limit higher on the 36v models, we recommend the more powerful 48v for speeds up to 45 kmh) Please note: 25 km/h is the legal limit within Australia for on-road use
  • Power Assist Ratio: 36%~300% (with 4 levels of torque sensitivity-to-power-output to choose from)
  • Maximum Torque 90 N.m
  • Pedal Cadence Assist: 90/100/110/120 RPM
  • XH-18 Left Handlebar Mount Half Twist Action Display (Compact, Color Screen, Half Twist +/- Mechanism)
  • Speed Sensor w/ Spoke Magnet (speed sensor attaches to the chain stay, and the magnet attaches to a wheel spoke)
  • Includes Light Cables controlled by the Display (for optional 6v 0.5-1a Front & Rear Lights ~ controlled from a button on the display)
  • Mid Drive Utilises the Drive Train Gearing (for increased efficiency & optimal hill climbing ability)
  • Chain Ring Size 42T
  • Integrated 6 pin Controller (for better protection and less wiring clutter)
  • Easy Installation (The TSDZ2 Mid Drive Kits fit 95% of bikes with threaded JIS/BSA bottom brackets)
  • Installation Tool
  • Small & Lightweight: 3.6 kg

Specifications:

Model

TSDZ2 mid-drive high speed geared motor

Position

Mid Motor

Construction

Gear Motor

Rated Voltage

48V

Power

500W

Max Torque

90N.m

Controller

Integrated into the motor

Sensor

Torque sensor is integrated into the motor

Power Assist Ratio

36%-300%

Bottom Bracket

68mm-73mm

Chain Wheel

42T

limited current

17A

Max Speed

35km/h

Motor weight

3.6kg

IP-Code

IP54

 

48 Volts

13AH

564Wh

DLG 18650 Cells

DP-6 Polly case, with added fitment options. 

Built to Cap Rouge specifications, this battery is suitable for bikes with motors up to and including 750W

All cells used in our batteries are 100% new and tested to International Electrotechnical Commission (IEC) standard 62133-2-2017, beware as many Australian suppliers do not mention the brand of cell used

  • 48V
  • 13 AH
  • 564 Wh
  • Battery charger included
  • 368L 90W 112H
  • Docking station
  • 2 keys
  • Weight 3.91 KG
  • 3 mounting slots to connect to bike frame
  • Discharge cable with micro Anderson connectors
  • 12 Month warranty
  • Continuous discharge 25A 
  • Battery Management System (BMS) Managing
  1. Charging voltage
  2. Balance voltage for single cell               
  3. Current consumption                
  4. Maximal continuous charging current     
  5. Maximal continuous Discharging current            
  6. Over charge Protection 
  7. Over discharge protection         
  8. Over current protection 
  9. Short protection
  10. Resistance Protection 

We have made it easy for you to chose a conversion kit combo, but if you would like to mix & match/build your own kit, please take a look at our batteries here or our motors here.

When you bundle a battery and conversion kit together, you will receive the "combo" discount price on checkout

 

*Images for visual purposes only

Please beware of all local rules and road law regulations