Skip to content
AUSTRALIA'S BIGGEST RANGE OF CERTIFIED EBIKE BATTERIES AND CHARGERS AT THE LOWEST PRICES ! FREE POSTAGE OVER $50*
AUSTRALIA'S BIGGEST RANGE OF CERTIFIED EBIKE BATTERIES AND CHARGERS AT THE LOWEST PRICES ! FREE POSTAGE OVER $50*
TongSheng 36V 350W TSDZ2 with Torque Sensor Mid Drive Conversion Kit and 13Ah Battery

TongSheng 36V 350W TSDZ2 with Torque Sensor Mid Drive Conversion Kit and 13Ah Battery

by Tongsheng
$1,048.00
SKU TSDZ236V250W13AH-1

TongSheng TSDZ2 36V 350W with Torque Sensor Mid Drive Conversion Kit and 13Ah DLG Battery

Fits 68-73MM Bracket

Torque Sensing Motor 

36V 13Ah / 468Wh Hailong Downtube Battery DLG Cells CPHLAD36-13 and 2A Charger

Why choose the little motor- TSDZ2 Mid drive motor?

  • Fits 95% of standard bike frames with 68-73mm bottom bracket built in torque and cadence sensor- this results in much smoother acceleration than any cadence sensor mid drive motor.
  • Easy to install. Kit includes all installation parts and tools.
  • The motor has an extra support mount - resulting in a much more reliable install.
  • 90Nm of torque

     The TSDZ2 Mid Drive Motor - Torque Sensing Pedal Assist: The harder you pedal - the harder the motor works with you. 4 levels of assist provide smoothly integrated power ranging from +36-300%, allowing you to conquer virtually any hill with ease. These kits retrofit most bicycles by replacing the bottom bracket & crankset assembly - to utilise the existing drivetrain & gears for maximum efficiency.

    The VLCD-5 Display - w/ Throttle & E-brakes: The VLCD-5 is a larger, centre mounted display with ports and wiring for a throttle, e-brakes, and an external handlebar mounted button panel. It also houses a USB port for charging your mobile device (installation/use of the throttle, e-brakes, and/or external button panel is optional).   

TSDZ2 36V 350W Version

 FEATURES:

  • Assisted Speeds up to 45 kmh  (motor does not provide assist past programmed limit on model, 45kmh being the maximum value - while you can set the motor speed limit higher on the 36v models, we recommend the more powerful 48v for speeds up to 45 kmh) Please note: 25 km/h is the legal limit within Australia for on-road use
  • Power Assist Ratio: 36%~300% (with 4 levels of torque sensitivity-to-power-output to choose from)
  • Maximum Torque 90 N.m
  • Pedal Cadence Assist: 90/100/110/120 RPM
  • VLCD-5 Large Center Mount Display (w/ Handlebar Mount Control Panel & USB Port for Mobile Device Charging)
  • Throttle (the throttle is governed and will not put out as much power as the assist function - this is to increase longevity and reliability of the motor)
  • E-brakes (the e-brakes cut power to the motor when depressed and can be fitted to both cable and hydraulic brake systems)
  • Speed Sensor w/ Spoke Magnet (speed sensor attaches to the chain stay, and the magnet attaches to a wheel spoke)
  • Mid Drive Utilises the Drive Train Gearing (for increased efficiency & optimal hill climbing ability)
  • Chain Ring Size 42T
  • Integrated 8 pin Controller (for better protection and less wiring clutter)
  • Easy Installation (The TSDZ2 Mid Drive Kits fit 95% of bikes with threaded JIS/BSA bottom brackets)
  • Installation Tool
  • Small & Lightweight: 3.6 kg

Specifications:

Model

TSDZ2 mid-drive high speed geared motor

Position

Mid Motor

Construction

Gear Motor

Rated Voltage

36V

Power

350W

Max Torque

90N.m

Controller

Integrated into the motor

Sensor

Torque sensor is integrated into the motor

Power Assist Ratio

36%-300%

Bottom Bracket

68mm-73mm

Chain Wheel

42T

limited current

16A

Max Speed

35km/h

Motor weight

3.6kg

IP-Code

IP54


36 Volts

13AH / 468WH

DLG 18650 2600mah Cells

Hailong battery, fits a broad range of bikes

This battery has recently passed UN38.3 testing, documents available here link

All cells used in our batteries are 100% new and tested to International Electrotechnical Commission (IEC) standard 62133-2-2017, beware as many Australian suppliers do not mention the brand of cell used

  • 36V
  • 13 AH
  • 468Wh
  • 367L 90W 92H including mounting bracket
  • Weight 3.3Kg
  • Battery charger included with Australian plug
  • Discharge cable with micro Anderson connector
  • DLG Cells, tested to IEC62133
  • 2 Year warranty
  • Keys with docking station
  • Continuous discharge 30A
  • Battery Management System (BMS) Managing
  1. Charging voltage
  2. Balance voltage for single cell               
  3. Current consumption                
  4. Maximal continuous charging current     
  5. Maximal continuous Discharging current            
  6. Over charge Protection 
  7. Over discharge protection         
  8. Over current protection 
  9. Short protection
  10. Resistance Protection 

We have made it easy for you to chose a conversion kit combo, but if you would like to mix & match/build your own kit, please take a look at our batteries here or our motors here.

When you bundle a battery and conversion kit together, you will receive the "combo" discount price on checkout

 

*Images for visual purposes only

Please beware of all local rules and road law regulations